The finger punch punches both ends of the belt at the same time, eliminating waste. This fully automatic and pneumatic machine makes finger punching quick and easy. Suitable for prepping finger and finger-over-finger splices for PVC and polyurethane belts up to 8mm thick and 3m wide.

Prep belts for splicing more efficiently and economically with this incomparable punch!

Features

• Sturdy subframe
• Automated 8″ cylinder, steel punching head for straight and angled configurations
• Punching board
• High-speed steel blades
• Two pneumatic cylinder clamps to hold belt in place
• Control panel
• Up to 100 psi air supply
• Unattended operation during punching operation
• Castors for ultimate portability

General Specifications

• Supply = 120VAC 60Hz
• Air = 1/4″ NPT 80 PSI Clean and Dry
• Maximum Belt Width = 60″
• Equipment Paint = Royal Blue (RAL 5010)
• Guards = Safety Orange (SW4083)

Available Models

• 2M Automatic Finger Punch
  • Angle, 10×70, 20×70 heads
  • c/w 3 punch heads, 120VAC, pneumatic interlock
  • Weight = 400kg
• 3M Automatic Finger Punch
  • Angle, 10×70, 20×70 heads
  • c/w 3 punch heads, 120VAC, pneumatic interlock
  • Weight = 750kg
• 3.5M Automatic Finger Punch
  • Angle, 10×70, 20×70 heads
  • c/w 3 punch heads, 120VAC, pneumatic interlock